INTRODUCTION: 

WPF series power supply launched by Wisman is a new nano knife, pulse ablation, medical special high voltage pulse power supply, full function, stable performance of high voltage suspended pulse power supply. It can realize the adjustment of voltage amplitude, pulse width and frequency, which can be triggered inside and outside, and can easily meet the needs of users. The computer FPGA chip is adopted, the algorithm is good, and the pulse has no jitter.

PRODUCT FEATURES:

1.AC220V AC input

2. Voltage up to ±3kV

3. Pulse voltage amplitude, pulse width, frequency adjustable

4. High voltage suspended pulse generator

5. Internal and external trigger optional

6. Pulse rising edge time <50ns

7. Pulse falling edge time <50ns

8. Pulse does not jitter

9. Can be customized amplitude, pulse width, frequency, rising edge, falling edge

TYPICAL APPLICATION:

nanoknife

pulse ablation

steep pulse ablation

atrial fibrillation therapy
 tumor ablation

animal experiment

shockwave rubble

CHARACTERISTIC DESCRIPTION:

Input voltage AC220V

The load range is 50~300 Ohm

Pulse shape rectangular square wave

Pulse polarity Positive polarity, negative polarity, positive and negative bipolar can be set

Pulse control can separately control the positive and negative pulses (can achieve the output amplitude, pulse width of the same period of the bipolar pulse (the same polarity amplitude pulse width))

Pulse amplitude ±5000V

Voltage overshoot is less than or equal to 10% of the set voltage

Average power 600W (plus or minus 300W)

±1000V, 5us, 6kHz 300w
±1500V, 5us, 2.6k Hz 292.5w
±2000V, 5us, 1.5k Hz 300w
±3000V, 5us, 650 Hz 292.5w
±5000V, 5us, 240 Hz 300w
 (The above is the maximum frequency parameter that can be output by a single channel with the maximum pulse width under the specified voltage at 100 ohm load, and the double channel frequency is reduced by half.)

Pulse width 200ns-5us adjustable (step size 5ns)

Pulse frequency 1Hz~10kHz adjustable (the specific frequency is affected by the average power of the machine)

The interval between positive and negative waveforms in phase delay bipolar waveform :100ns-1000us

The rise/fall edge time is less than 50ns

Single pulse mode

Number of single pulse outputs: 1-65535 adjustable, or infinite number of periodic signals (step size is 1)

Can set the output number of pulses after the automatic stop

Pulse train mode

The number of subpulses in the pulse train 1-100 (plus or minus is a waveform, that is, a cycle)

Pulse train interval 1ms-1s

The pulse width in the string is 200ns-5us

Can set the output number of pulse train automatically stop

Pulse amplitude attenuation 100Ω load, 3kV amplitude, 5μs pulse width, double pulse, pulse amplitude attenuation <10% compared with the leading edge amplitude

Control mode and function

4U case, control box or panel control all parameters

Parameters can be memorized

Start and stop mode: manual start and stop, foot start and stop, external trigger start and stop, trigger delay 0-200ms (error plus or minus 1us)

Provide BNC input and output trigger interface to accept external trigger signal, or output trigger external device signal (5V TTL)

Provide RS485 interface, provide communication protocol, the user to develop the upper computer

Voltage amplitude, pulse width, frequency, rising/falling edge time, phase delay time, pulse delivery mode (monopulse mode, pulse string mode), pulse string interval and other parameters can be adjusted on the panel. (The initial software of the machine can be controlled)

Protection function

Equipment such as short circuit, overload, leakage, serious heating and other situations can be automatically stopped (rated current can be set to 60A maximum)

When there is an electric spark, arc or waveform discontinuity, the real-time alarm can be generated when the high-voltage output port is separated from the ground, and the ground has two or more interfaces

AMBIENT TEMPERATURE:

0 to +50℃ when working

-20 ° C to +80 ° C when storing

Overall dimensions: length 580mm, width 485mm, height 266mm

Weight: about 15kg.

Number of output channels
 Single channel, dual channel

Single channel: WPE; Dual channel: WPE2;

NOTE: 

1. Most of the pulse power supply is customized, the current shipments are 4U chassis products, the picture is for reference only, subject to the actual.

2. You need to contact Wisman technical staff for purchase, and communicate clearly in accordance with the final contract signed by both parties!

Wisman accepts all kinds of customization, and all technical property rights belong to Wisman.

For information about Wisman and more of its high-voltage products, call 086-029-88444525 or visit its Web site: www.wismanhv.com

Wisman High Voltage Power Supply Co., Ltd. is a manufacturer of high voltage power supply products such as miniature high voltage power supply modules, high voltage power supply modules, X-ray tube high voltage power supply, chassis high voltage power supply, custom high voltage power supply, high voltage accessories, etc. The company designs and manufactures custom and standard high voltage power supply products ranging from 100mW to 200kW, Voltage range from 60V to 500kV. The applications of Wisman products cover medical, industrial, analytical instruments and scientific research fields. High voltage power supplies You can purchase a wide range of specifications at Wisman in one stop.

Wisman High voltage Power Supply Co., LTD., the company has a high voltage power supply R & D team, high voltage power supply R & D software and testing software. High voltage insulation technology, zero current resonance technology, so that Wisman high voltage power supply to maintain high stability, low ripple, low electromagnetic interference, small size, low loss, high efficiency, long life. Wisman High voltage power supplies are competitively priced and are ideal for OEM applications.