INTRODUCTION

Wisman's MEF series is a dedicated high-stability modular, the voltage is from 1kV to 70kV, can provide up to 350W of continuous power. The MEF series is a 350W modular with AC wide voltage input of 86Vac~265Vac. The front end has a power factor correction circuit with a power factor correction capability of 0.99, and automatic cross control of voltage regulation and current regulation. It has good regulation performance and can provide positive or negative high-voltage output,MEF can be controlled by internal,external and computer with RS-232, RS-485, ETHERNET digital control interface. It has the over-voltage, over-current, arc drawing, safety interlock and other protection functions. MEF can work easily under the most severe conditions.

APPLICATION:

Ion implantation

Accelerator

Capacitor charging

Electron beam power supply

Ion beam power supply

High-energy particle injection

X-ray tube, electrostatic oiling

Electrostatic spinning

Electrostatic spraying

Electrostatic flocking, air purification

Electrostatic smoke removal

Electrostatic dust removal

Industrial equipment

Electronics Component aging

Insulation testing

Ion implantation

Electrostatic application laser

Scientific research.

SPECIFICATION

Input: AC86V-286V, maximum current 10A.

Output: Various maximum voltage outputs such as 1KV to 70KV are selectable, and 0V to maximum voltage is adjustable.

Voltage control:

Local: The local multi-turn potentiometer can set the output voltage between 0V and the highest voltage.

Remote : An external 0 to 10V control signal can adjust the output from 0V to the highest output voltage.

Current control:

Local: The local multi-turn potentiometer can set the current from 0 to the highest current.

Remote: An external 0 to 10V control signal can set the current from 0 to the highest current.

Voltage regulation:

Relative load: 0.01%+5000mV (no load to rated load)

Relative input: ±0.01%+500mV (input voltage change is ±10%)

Current regulation:

Relative load: 0.01%±100uA (no load to rated load)

Relative input: ±0.01% (input voltage change ±10%).

Ripple voltage: 0.1% P-P +1Vrms.

Temperature coefficient: 25ppm, higher temperature coefficient can be customized.

Stability: less than 100ppm per hour after half an hour of booting.

Working temperature: 0 to +50°C.

Storage temperature: -40℃ to +85℃.V

Voltage and current indication: 4-digit digital panel meter, accuracy is 1% under rated output conditions.

Dimensions:80.00mm x 254.00mm x280.00mm,

Connector:

High-voltage output connector: The recessed insulated conduit and the probed high-voltage cable are connected through a metal connector.

Input and output connector: DB15, contains control and display signals.

Remote control of output voltage and current:An external potentiometer can be used to remotely control the output voltage and current using the 10V voltage reference inside the power supply.

Remote voltage and current indication: DB15 contains 0 to 10V voltage and current indication signals, which can be connected to various digital or pointer tables.

For information concerning our high voltage products, please call at 086-029-33693480 or visit our website www.wismanhv.com

Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. The application fields of Wisman products cover medical, industrial, semiconductor, safety, environment, analytical instruments, scientific research and other fields. You can purchase a variety of specifications in one-stop high-voltage power supplies from Wisman. We have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.

Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.