Wisman's AMT series  is a high-voltage power amplifier for industrial and research applications. All solid-state high voltage insulation design for high slew rate, wide bandwidth and low noise operation. Four-quadrant active outputs sink or source current into reactive or resistive loads over the entire output voltage range. This type of output from Wisman high voltage power supplies is essential to achieve accurate output response and the high slew rates required for various loads such as highly capacitive or reactive loads. This amplifier is a non-inverting amplifier.

Features: 

Four-quadrant output for driving capacitive loads

Closed-loop system for high precision

Short circuit protection for equipment protection

All-solid-state design, maintenance-free operation

DC Stabilized Programmable Power Supply Applications

Low output noise provides highly accurate output

Application: 

Dielectric elastomers, soft robots, HASEL actuators (artificial muscles), electroactive polymers (EAP), ionically conductive polymer gel films (ICPF), pneumatic artificial muscles (PAM), electroviscous fluids (ER fluids), Magnetorheological Fluids (MR Fluids), Ferroelectric Testers, Piezoelectric Actuation and Control, Laser Modulation, Semiconductor Research, Electrostatic Deflection, Electrorheological Fluids, AC or DC Bias, Particle Accelerators, Mass Spectrometers, Materials Characterization, Ferroelectricity Bulk, atmospheric plasma, dielectric barrier discharge, dielectric barrier discharge (DBD), DBD plasma actuator, atmospheric pressure plasma, corona discharge, electrostatic levitation furnace (ELF), electrostatic tactile display, water tree, dielectric shock Penetration testing, ion beam deflection, electron beam deflection, electrophoresis, dielectrophoresis (DEP), flash sintering, material polarization, ion engines, particle accelerators, material characterization, electrostatic actuators, electrospinning, electrostatic spraying, electrostatic coating packaging, solar panel (photovoltaic) testing, Langmuir probes, electro-optic modulation, electrophotography, corona generators, Scorotron grid consumables, primary charging rollers (PCR), developing rollers, corona charging supplies, photosensitive drums Charging, electrostatic chucks, electrostatic deflection of charged particle beams, 3D printing (application of electrohydraulic dynamics (EHD) technology), etc.

Feature description:

Input voltage: 220AC±10%

Input current: 3A

Output voltage: 0 ~±10kvDC or peak AC

Output current: 0 ~±10mADC or 40mA peak AC for 1 ms

Input Impedance: 20kΩ

DC voltage gain: 1000V/V

DC voltage gain accuracy: better than 0.1% of full scale

DC offset voltage: less than ±2V

Output noise: less than 0.5V rms

Slew rate: greater than 700 V/μs (typically 10% to 90%)

Large Signal Bandwidth

DC to greater than 9.5khz (1% distortion)

DC to 19.5kHZ (-3dB)

Small signal bandwidth (3 db): DC to greater than 60khz

Stability: less than 50ppm /hr, non-cumulative

Temperature Coefficient: Less than 25ppm/°C

Operating Temperature: Temp 0°C to 40°C (32°F to 104°F)

Working humidity: 85% relative humidity, non-condensing

Maximum altitude: 2000 meters (6561.68 feet) above sea level

Dimensions: 190 mm H x 432 mm W 417 mm D (10.4H x 19” W x 25” D)

Weight: 14.9kg

voltage Monitor

Display ratio: 1000:1

DC accuracy better than 0.1% of full scale

DC offset voltage less than ±2.5 mV

Output noise is less than 10mv root mean square

Output impedance 47Ω

current Monitor

Display scale: 0.025 V/mA

DC accuracy greater than 0.5% of full scale

Offset voltage less than ±10 mV

Output noise is less than 30mv

Output impedance 47Ω

10/10B-HS

For information concerning our high voltage products, please call at 086 029 89282015  or visit our website: www.wsmhv.com

Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. You can purchase multiple varieties and specifications in one-stop from us. We have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.

Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.