INTRODUCTION

Wisman's high voltage amplifier AMX30R600, output voltage ±30kV, output current 20mA, type is a high voltage power amplifier, used in industrial and research applications. All solid-state high voltage insulation design can achieve high conversion rate, wide bandwidth and low noise operation. The four-quadrant active output sinks or outputs current to reactive or resistive loads within the entire output voltage range. This type of output is essential for achieving accurate output response and the high slew rate required for various loads, such as high capacitive or reactive loads. The amplifier is a non-inverting amplifier.

FEATURES AND ADVANCE

Four-quadrant output for driving capacitive loads

Closed loop system achieves high accuracy

Short circuit protection for equipment protection

All solid-state design, maintenance-free operation

DC stable programmable power supply application

Low output noise, providing ultra-precise output

APPLICATIONS:

Dielectric elastomer, soft robot, HASEL actuator (artificial muscle), electroactive polymer (EAP), ionic conductive polymer gel film (ICPF), pneumatic artificial muscle (PAM), electroviscous fluid (ER fluid), Magnetorheological fluid (MR Liquid), ferroelectric tester, Piezoelectric Drive and Control, Laser modulation, Semiconductor research, electrostatic deflection, electrorheological fluid, AC or DC bias, Particle Accelerator, Mass Spectrometer, Material Characterization, ferroelectric, Atmospheric plasma, Dielectric barrier discharge, dielectric barrier discharge (DBD), DBD plasma actuator, atmospheric pressure plasma, corona discharge, electrostatic suspension furnace (ELF), electrostatic haptic display, Water tree, dielectric breakdown testing, ion beam deflection, electron beam deflection, electrophoresis, Dielectrophoresis (DEP), flash sintering, material polarization, ion engine, particle accelerator, material characterization, electrostatic actuator, electrostatic spinning, electrostatic spraying, electrostatic coating, solar panel (photovoltaic cell) testing, Langmuir probe, electro-optical modulation Manufacturing, electrophotography, corona generator, Scorotron grid consumables, main charging roller (PCR), developing roller, corona charging supplies, sensitive drum charging, electrostatic suction cup, electrostatic deflection of charged particle beam, 3D printing (application of electro-hydraulic power (EHD) technology), etc.

SPECIFICATIONS:

Input voltage: 220AC±10%

Input current: 10A

Output voltage: 0 ~ ±30kv DC or AC peak

Output current: 0 ~ ±20 mA DC or AC peak

Input voltage range: 0 to ±10 V DC or peak AC

Input impedance: 25kΩ

DC voltage gain: 3000V /V

DC voltage gain accuracy: better than 0.1% of full scale

DC offset voltage: less than ±4V

Output noise: less than 1.5V rms

Slew rate: greater than 550 V /μs (generally 10% to 90%)

Large signal bandwidth: DC to greater than 2.5khz

Small signal bandwidth (-3 db): DC to greater than 30Hz (1% distortion) Stability: less than 50ppm/hr, non-cumulative

Temperature coefficient: less than 25ppm /°C

Working temperature: temperature 0°C to 40°C (32°F to 104°F)

Working humidity: 85% relative humidity, non-condensing

Maximum altitude: 2000 meters above sea level (6561.68 feet) Dimensions: 1040 mm H x 430 mm W x 870mm D (41” H x 17” W x 34” D) Weight: 70kg

Voltage display

Display ratio: 3000:1

DC accuracy is better than 0.1% of full scale

DC offset voltage is less than ±5 mV

Output noise is less than 20mv rms

Output impedance 47Ω

Current display

Display ratio: 1 V /6 mA

DC accuracy is greater than 0.5% of full scale

Offset voltage is less than ±10 mV

Output noise is less than 30mv

Output impedance 47Ω

 30/20A

For information concerning our high voltage products, please call at 086 029 89282015 or visit our website www.wsmhv.com

Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. You can purchase multiple varieties and specifications in one-stop from us. We have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.

Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.